Crestron Logic Symbols

Jeff P
Oct 12, 2024

--

Part 15 —Analog Min/Max Scaler

In a lighting application, for example, if the Analog Ramp is set to ramp an analog signal from 0% to 100% in a ramp time of 5 seconds, and the desired lighting levels range from 20% to 80%, the Analog Ramp symbol can drive an Analog Min/Max Scaler with a <Minimum> of 20% and a <Maximum> of 80%. This will produce a signal that smoothly ramps from 20% to 80% (and vice versa) in 5 seconds.

--

--

Jeff P
Jeff P

Written by Jeff P

I tend to write about anything I find interesting. There’s not much more to it than that really :-)

No responses yet